IBPS IT SO Study material- Computer Networks
SONET
1. SONET stands for
a) synchronous optical network
b) synchronous operational network
c) stream optical network
d) shell operational network
a) synchronous optical network
b) synchronous operational network
c) stream optical network
d) shell operational network
Answer:a
Explanation:None.
Explanation:None.
2. In SONET, STS-1 level
of electrical signalling has the data rate of
a) 51.84 Mbps
b) 155.52 Mbps
c) 466.56 Mbps
d) none of the mentioned
a) 51.84 Mbps
b) 155.52 Mbps
c) 466.56 Mbps
d) none of the mentioned
Answer:a
Explanation:None.
Explanation:None.
3. The path layer of
SONET is responsible for the movement of a signal
a) from its optical source to its optical destination
b) across a physical line
c) across a physical section
d) none of the mentioned
a) from its optical source to its optical destination
b) across a physical line
c) across a physical section
d) none of the mentioned
Answer:b
Explanation:None.
Explanation:None.
4. The photonic layer
of the SONET is similar to the _____ of OSI model.
a) network layer
b) data link layer
c) physical layer
d) none of the mentioned
a) network layer
b) data link layer
c) physical layer
d) none of the mentioned
Answer:c
Explanation:None.
Explanation:None.
5. In SONET, each
synchronous transfer signal STS-n is composed of
a) 2000 frames
b) 4000 frames
c) 8000 frames
d) 16000 frames
a) 2000 frames
b) 4000 frames
c) 8000 frames
d) 16000 frames
Answer:c
Explanation:None.
Explanation:None.
6. Which one of the
following is not true about SONET?
a) frames of lower rate can be synchronously time-division multiplexed into a higher-rate frame
b) multiplexing is synchronous TDM
c) all clocks in the network are locked to a master clock
d) none of the mentioned
a) frames of lower rate can be synchronously time-division multiplexed into a higher-rate frame
b) multiplexing is synchronous TDM
c) all clocks in the network are locked to a master clock
d) none of the mentioned
Answer:d
Explanation:None.
Explanation:None.
7. A linear SONET
network can be
a) point-to-point
b) multi-point
c) both (a) and (b)
d) none of the mentioned
a) point-to-point
b) multi-point
c) both (a) and (b)
d) none of the mentioned
Answer:c
Explanation:None.
Explanation:None.
8. Automatic
protection switching in linear network is defined at the
a) line layer
b) section layer
c) photonic layer
d) path layer
a) line layer
b) section layer
c) photonic layer
d) path layer
Answer:a
Explanation:None.
Explanation:None.
9. A unidirectional
path switching ring is a network with
a) one ring
b) two rings
c) three rings
d) four rings
a) one ring
b) two rings
c) three rings
d) four rings
Answer:b
Explanation:One ring is used as the working ring and other as the protection ring.
Explanation:One ring is used as the working ring and other as the protection ring.
10. What is SDH?
a) SDH is similar standard to SONET developed by ITU-T
b) synchronous digital hierarchy
c) both (a) and (b)
d) none of the mentioned
a) SDH is similar standard to SONET developed by ITU-T
b) synchronous digital hierarchy
c) both (a) and (b)
d) none of the mentioned
Answer:c
Explanation:None.
Explanation:None.
All the best for your exams @Mission IT SO 2016
No comments:
Post a Comment